RESUMEN
Detailed calculations of the formation, guide, and mirror applied magnetic fields in the FRC compression-heating experiment (FRCHX) were conducted using a commercially available generalized finite element solver, COMSOL Multiphysics(®). In FRCHX, an applied magnetic field forms, translates, and finally captures the FRC in the liner region sufficiently long to enable compression. Large single turn coils generate the fast magnetic fields necessary for FRC formation. Solenoidal coils produce the magnetic field for translation and capture of the FRC prior to liner implosion. Due to the limited FRC lifetime, liner implosion is initiated before the FRC is injected, and the magnetic flux that diffuses into the liner is compressed. Two-dimensional axisymmetric magnetohydrodynamic simulations using MACH2 were used to specify optimal magnetic field characteristics, and this paper describes the simulations conducted to design magnetic field coils and compression hardware for FRCHX. This paper presents the vacuum solution for the magnetic field.
RESUMEN
A fast ( approximately 300 ns), large-signal ( greater, similar1 V), free-standing foil bolometer was developed for measuring ultrasoft x-ray burst fluences. The results of bolometer measurements of the radiation output of an imploding foil liner plasma indicate yields of several tens of kJ, assuming isotropic emission. This is in substantial agreement with filtered metal photocathode (x-ray diode) measurements. The bolometer design, response function, and comparison with x-ray photodiode data are discussed. This type of bolometer is particularly applicable to radiation measurements of high-energy, destructive pulsed plasmas such as high-energy imploding liner plasmas.
